Level 1 - Assembeling Tape:

First off, this used to be a turkey GameCube, It had a damadged shell on the side where the fan was. The fan was still working at this time, after a while the fan was becoming less efficient until eventually it stopped working all together.

Me & my mum's ex (whom at the time was boyfriend) where fixing the console. The problem was it would over-heat & crash, so we got a new fan & started taking off the cover. We then realised the fan was working perfectly fine & it was the GameCube damadged cover that was pressing against the fan stopping it from working. So we put the new fan in it anyway (Because it was the same size & voltage but more efficient) & repaired the cover so it wouldn't press against the fan. After that we drilled a grid onto the side of the console so it would protect the vent.

Now I'm taping around the top of it because I'm going to stencil some Black Roses over the original dark purple.

Left-Front, Front, Right-Front, Top-Left-Front, Top-Left-Back, Top-Back.

Level 2 - Spraying the lid:

The Rose stencil didn't work, but that's ok because I've just sprayed the lid black & it goes rather nicely with the rest of the cube.

Lid.